1. Safer vertical water tube boiler structure
As one of the safest boiler structures, water tube boiler structure has upper header steam storage bag to ensure better steam quality and higher thermal efficiency.
2. Smoother nine stage linear transmission experience
The steam volume is 1:9, and the output of ultra long regulation ratio. The minimum steam volume is as low as 150kg / h without shutdown. The steam pressure is more stable and the use is more energy-saving.
3. Equipped with high-efficiency full 316L condensing heat exchanger
It is equipped with high-temperature economizer and low-temperature condenser. It is made of corrosion-resistant 316L stainless steel. The exhaust gas temperature is as low as 55 ℃. The boiler fully absorbs the latent heat released by water vapor condensation in the flue gas, and the thermal efficiency reaches 100.1%.
4. Low NOx emission
Advanced combustion process control technology is adopted to effectively inhibit the generation of n0x in the combustion process and meet the most stringent environmental protection requirements. NOx emission is as low as 10mg / m3.
5. No use certificate, no operation certificate, no annual inspection
The water volume of the body is less than 30L, and the pressure can reach 1.0/1.3/1.6mpa. According to the national regulations boiler regulations, it does not belong to the inspection scope of boilers and pressure vessels, and there is no need to apply for use certificate, annual equipment inspection and special equipment operation certificate.
6. New 360 ° heat exchange flue gas process application
The 360 ° uniform radiation water pipe of combustion flue gas makes each water pipe balance heat exchange, avoids local overheating and easy scaling and pipe explosion, and better prolongs the service life of the equipment.
7. Low gas pressure combustion
Meet the service conditions of minimum 1.8kpa gas pressure, micro positive pressure combustion, stable operation in the face of pipe network pressure fluctuation, and is not affected by gas consumption peak.
8. Intelligent Internet of things remote control system
The boiler operates automatically, adopts 7-inch color touch screen, has a variety of adjustment and protection functions, and is easy to operate without special personnel on duty; The control system can realize group control function and remote monitoring function.
Manufacturing basis
1. The boiler design and manufacture shall be selected in accordance with the provisions of the supervision regulation on safety technology of steam boiler.
2. The heating surface materials and welding rods and wires used in the boiler shall have quality certificates.
3. The boiler shall be manufactured in accordance with JB / t1618 technical conditions for manufacturing pressure parts of shell boiler.
4. Boiler welding shall be carried out in accordance with JB / t1613 technical conditions for welding of boiler pressure components.
5. The welding of boiler pressure components must be performed by welders who have passed the examination in the rules for examination and management of welders for boiler, pressure vessel and pressure pipeline.
6. The boiler nondestructive testing shall be carried out according to the provisions of JB / t4730 nondestructive testing of pressure equipment and Article 82 of supervision regulations on safety technology of steam boiler. 100% flaw detection shall be carried out on the welding joints, and it is qualified if the quality is not lower than II.
7. After the boiler is manufactured, it shall be carried out according to JB / t1612 technical conditions for boiler hydrostatic test, and the test pressure is 1.2MPa.
8. Refer to JB / t1615-91 for painting, packaging and transportation of boiler.
Service1 
Service2